Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
2.8
Safety instructions for installation, commissioning and maintenance
• The user ensures that any installation, commissioning and maintenance works are carried out by author-
ised, qualified specialists who have gained sufficient information by an in-depth study of the Operating
Instructions as well as the operating instructions of the pump
• Only work on the machine when it stands still and is secured against accidental switching on
• Strictly observe the procedure for decommissioning the machine described in the operating instructions
• Fit or start up safety and protective devices again immediately after finishing work. Before recommission-
ing, follow the instructions listed for commissioning
• Alteration works or modifications to the machine and the control are only permissible with the manufac-
turer's consent
• Only use original parts or parts approved by the manufacturer. The use of other parts may void the liabili-
ty for any resulting consequences
• Keep unauthorised people away from the machine
2.9
Hazardous substances
2.9.1
Conveying media
Compressors that may make contact to hazardous substances can cause serious burns, cauterisation or
poisoning during disassembly, maintenance and repair work.
• Before using our services each time, for occupational safety and environmental protection reasons, it is
necessary to indicate and declare hazardous substances on or in the device.
• Send the declaration of clearance filled in and signed back to Gardner Denver.
If no declaration takes place, we must assume that the device is free from such substances. In case of
doubt, our service department reserves the right to reject the acceptance until the safety has been deter-
mined without doubt.
2.9.2
Auxiliary materials and lubricant
Incorrect auxiliary materials and lubricants may decompose at high temperatures. The resulting vapours may
be harmful to health and cause fires.
• Use exclusively the recommended auxiliary materials and lubricants.
• Observe the oil recommendation sign on the pump.
• Observe the safety data sheets of the substances used.
2.10 Safety equipment, monitored functions
Missing or non-functional safety equipment may lead to dangerous operating states and thus result in
life-threatening injuries.
• Do not modify or bypass safety equipment and safety functions
• Check the function at regular intervals
Prematic AG, Märwilerstrasse 43, 9556 Affeltrangen www.prematic.ch
www.gd-elmorietschle.com © Gardner Denver Schopfheim GmbH
Tel. 071 918 60 60, Mail: v-g@prematic.ch
Safety
9
|
Werbung
Kapitel
Inhaltsverzeichnis
