Dpi Opc Copyprofile; Dpi Opc Delprofile; Dpi Opc Enableprofile; Dpi Opc Disableprofile - Belden HIRSCHMANN EAGLE40-07 HiSecOS Referenzhandbuch

9 .1 .1 1 dpi opc c opyprofile
Copies a profile to another DPI OPC profile.

Mode: Global Config Mode

Privilege Level: Operator

Format: dpi opc copyprofile <P-1> <P-2>
Parameter Value
1..32
P-1
P-2 1..32
9 .1 .1 2 dpi opc de lprofile
Deletes a profile from the DPI OPC profile table. You cannot delete an active profile or if an enforcer mappings to it.

Mode: Global Config Mode

Privilege Level: Operator

Format: dpi opc delprofile <P-1>
Parameter Value
1..32
P-1
9 .1 .1 3 dpi opc e na ble profile
Enables a profile in the DPI OPC profile table. A profile can only be activated when all required parameters are
set. After activation modifications no longer possible.

Mode: Global Config Mode

Privilege Level: Operator

Format: dpi opc enableprofile <P-1>
Parameter Value
1..32
P-1
9 .1 .1 4 dpi opc disa ble profile
Disables a profile in the DPI OPC profile table. You cannot inactivate a profile if an active enforcer mappings to it.

Mode: Global Config Mode

Privilege Level: Operator

Format: dpi opc disableprofile <P-1>
Parameter Value
1..32
P-1
9 .1 .1 5 dpi dnp3 profile a dd
Adds a profile to the DPI DNP3 profile table.

Mode: Global Config Mode

Privilege Level: Operator

Format: dpi dnp3 profile add <P-1> [description <P-2>] [function-code-list <P-3>]
[default-object-list <P-4>] [sanity-check <P-5>] [crc-check <P-6>] [outstation-
packets-check <P-7>] [reset-tcp-check <P-8>]
[description]: Profile description/name for the DPI DNP3 profile.
[function-code-list]: Function code list. A function code has the syntax 'val'. Function codes are separated
by a comma.
[default-object-list]: Object entries to be included from Default white list.
[sanity-check]: Sanity check including format and specification.
[crc-check]: CRC verification for DNP3 data link layer frames.
[outstation-packets-check]: Check the DNP3 data packets originating at an outstation.
[reset-tcp-check]: Reset the TCP connection in case of a protocol violation or if the plausibility check leads
to errors.
Parameter Value
P-1 1..32
P-2 string
44
Meaning
Profile source index 1 - 32
Profile destination index 1 - 32
Meaning
Profile index 1 - 32
Meaning
Profile index 1 - 32
Meaning
Profile index 1 - 32
Meaning
DNP3 profile index.
Profile description/name for the DNP3 profile.
RM CLI EAGLE40_07
Release 3.5 10/2020