Dpi Dnp3 Profile Delete - Belden HIRSCHMANN EAGLE40-07 HiSecOS Referenzhandbuch

[reset-tcp-check]: Reset the TCP connection in case of a protocol violation or if the plausibility check leads
to errors.
Parameter Value
1..32
P-1
string
P-2
0..255
P-3
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
129
130
131
P-4 1..317
1..317
none
all
P-5 enable
disable
enable
P-6
disable
enable
P-7
disable
P-8 enable
disable
9 .1 .1 7 dpi dnp3 profile de le t e
Deletes a profile from the DPI DNP3 profile table. You cannot delete an active profile or if an enforcer mappings
to it.

Mode: Global Config Mode

Privilege Level: Operator

Format: dpi dnp3 profile delete <P-1>
Parameter Value
1..32
P-1
46
Meaning
DNP3 profile index.
Profile description/name for the DNP3 profile.
Function codes for the DNP3 profile.
Confirm
Read
Write
Select
Operate
Direct Operate
Direct Operate-No Response Required
Freeze
Freeze-No Response Required
Freeze Clear
Freeze Clear-No Response Required
Freeze At Time
Freeze At Time-No Response Required
Cold Restart
Warm Restart
Initialize Data
Initialize Application
Start Application
Stop Application
Save Configuration
Enable Unsolicited Messages
Disable Unsolicited Messages
Assign Class
Delay Measurement
Record Current Time
Open File
Close File
Delete File
Get File Information
Authenticate File
Abort File Transfer
Activate Configuration
Authenticate Request
Authenticate Request-No Acknowledgement
Response
Unsolicited Response
Authentication Response
Comma separated index values e.g 1,2,3.
Comma separated index and range of index values e.g 1-10,120-300.
'none' to exclude all default object list entries.
'all' to include all default object list entries.
Enable the option.
Disable the option.
Enable the option.
Disable the option.
Enable the option.
Disable the option.
Enable the option.
Disable the option.
Meaning
DNP3 profile index.
RM CLI EAGLE40_07
Release 3.5 10/2020