Operation; General Operation - Renkforce CD-7657 Bedienungsanleitung

Operation

Do not turn on the device before you have read and understood these operating instructions.
Check all the connections again. When you have done so, reconnect the negative pole of the
car battery.

General Operation

• Button (1)
This button switches the radio on and off.

To switch the CD tuner on, you can also press any other button.
• SELECT button (2) and VOLUME rotary control (3)
In standard operation, the VOLUME rotary control (3) is for setting the volume.
Press the SELECT button (2) once or several times to change the parameters BAS (bass control), TRB (treble
control), BAL (balance control) and FAD (fader control) by turning the VOLUME rotary control (3).
• MODE Button (9)
With this you can select various audio sources. Every time the button is pressed, the radio switches to the next source:
AUX > TUNER > CD > USB > SD

When one of the sources is not active, i.e. no medium inserted, this source will be skipped in the
selection.
49