Operation; General Operation - Renkforce sd 7629 Bedienungsanleitung

Operation

Do not turn the device on before you have read and understood these operating instructions.
Check all the connections again. When you have done so, reconnect the negative pole of the
car battery.

General operation

• Button (1)
Turn the device on or off with this button. To turn the device off, keep the button depressed.
• SELECT button (2) and VOLUME control (3)
In standard operation, the VOLUME control (3) is for setting the volume.
Press the SELECT button (2) once or several times, to change the parameters BAS (bass control), TRE (treble
control), BAL (balance control) and FAD (fader control) by turning the VOLUME control (3).
VOL
• DISP button (8)
With this button various data can be displayed on the LC display (14). Press the button once more to move to the
next display.
When the button is not activated any more, the display returns to the original information after a little while.
When an RDS station is being received
Radio operation:
SD/USB operation:
When no RDS station is being received
Radio operation:
SD/USB operation:
44
SEL BAS SEL
Station name > Time > Program type > Transmission frequency
Track display > Time > Program type > Transmission frequency
Transmission frequency > Time > PTY NONE
Track display > Time > PTY NONE > Transmission frequency
TRE SEL BAL
Operating Instructions
English
SEL FAD SEL