Menu Settings - Renkforce CD-7657 Bedienungsanleitung

Operation

Menu Settings

• SELECT button (2) and VOLUME rotary control (3)
To select the menu settings, please press the SELECT button (2) a little longer (>2 seconds) and then press this
button once more, but only very shortly, until the desired function appears on the display:
Choose the options for the respective settings by turning the VOLUME rotary control (3).
TA SEEK/ALARM
TA SEEK: When the radio has lost the traffic information, it will seek a new station with Traffic Announcement
coding.
TA ALARM: When the radio cannot receive the TA code anymore, there will be an alarm signal.
PI SOUND/MUTE
Device reaction when a transmission area is reached where 2 different stations with different programme
identification are transmitting the same AF (alternative frequency:
PI SOUND: The radio switches to the new station for a few seconds and then back.
PI MUTE: The new station is muted.
RETUNE S/L
RETUNE S: When the radio does not receive traffic announcements anymore, the auto-scan starts 30
seconds later.
RETUNE L: When the radio does not receive traffic announcements anymore, the auto-scan starts 90
seconds later.
MASK DPI/ALL
Device reaction during channel search:
MASK DPI: Alternative frequencies with different programme information (PI) are not considered.
MASK ALL: Alternative frequencies with different programme information (PI) and alternative frequencies
with a high signal strength but without RDS information are not considered.
52
Operating Instructions

English