Operation; General Operation - Renkforce RUSD-1803BT Bedienungsanleitung

10. Operation

Only take the device into operation after familiarising yourself with its functions and these operating
instructions.
Check all the connections again. When you have done so, reconnect the negative pole of the car battery.
a) General Operation
MUT/ button (2)
• This button switches the radio on and off and activates muting.
• Push the button briefly with the device off to switch it on.
• Push the button long with the device off to switch it off.
• Push the button briefly with the device switched on to activate muting. The display (6) shows MUTE. To deactivate
the mute function, push the MUT/ (2) again, but only briefly.
Rotary control (3)
• Turning this switch adjusts the volume.
• Brief or long pushing of this switch permits additional menu settings.
• Briefly push rotary control (3):
BAS > TRE > BAL > FAD > LOUD > EQ > STEREO/MONO > LOC > BEEP
• Pushing the rotary control (3) long:
AF ON/OFF > TA SEEK/ALARM > PI MUTE/SOUND > RETUNE S/L > MASK DPI/ALL
• These settings are explained in more detail later in these instructions under "Menu Settings".
Display (6)
• The display (6) shows all the information, depending on the audio source that is being played (radio, USB playback
etc.).
MOD / (20) button
• With this button the different audio sources are selected and the handsfree is operated (explained in more detail in
the chapter "Bluetooth
• Briefly push the button
RADIO > BT AUDIO > USB > SD > AUX-IN
When one of the sources is not active, i.e. no medium inserted, this source will be skipped in the selection.
40
-Operation" later in these instructions).
®
MOD /
(20) to switch to the next source: