Renkforce CD-7657 Bedienungsanleitung Seite 53

Operation
EON ON/OFF
Here you define whether the RDS-EON function is activated or deactivated (explanation see „RDS as reception
concept" further down in this manual).
EON ON: The RDS-EON function is activated.
EON OFF: The RDS-EON function is deactivated.
BEEP ALL/OFF/2ND
BEEP ALL: Every activation of a button is confirmed by an audio signal.
BEEP OFF: The sound confirmation function is deactivated.
BEEP 2ND: The button confirmation sound only sounds when a button is pressed for a longer period to
activate its additional function.
TAVOL
In case of traffic reports and activated TA function, the preset volume is selected where the volume set is lower.
Set the desired volume by turning the VOLUME rotary control (3).
ADJ (time settings)
Turn the VOLUME rotary control (3) clockwise to set the hours.
Turn the VOLUME rotary control (3) counter-clockwise to set the minutes.
This setting is applied automatically when the display returns to the basic setting.

When receiving an RDS station with time transmission, the clock adjusts automatically to the correct
time and the manually set time is overwritten with the RDS time.
DSP
DSP OFF: The digital signal processor is switched off.
DSP FLAT: DSP is active, but there is no sound adaptation.
DSP POP: The sound characteristic is adapted to pop music.
DSP ROCK: The sound characteristic is adapted to rock music.
DSP CLAS: The sound characteristic is adapted to classical music.
53