Operation; General Operation - Renkforce BT-RSD1802K Bedienungsanleitung

Operation

Only take the device into operation after familiarising yourself with its functions and these
operating instructions.
Check all the connections again. When you have done so, reconnect the negative pole of the
car battery.

General Operation

• Button / MUT (6)
This button switches the radio on and off and activates muting.
Push briefly with the device switched off > device is switched on
Push briefly with the device switched on > muting is switched on or off
Keep pushed with the device switched on > device is switched off

To switch the SD tuner on, you can also push any other button on the device.
• VOLUME rotary control / SELECT button (9)
In standard operation, the VOLUME control is for setting the volume.
Push the SELECT button (2) once or several times to change the parameters BAS (bass control),
TRB (treble control), BAL (balance control) and FAD (fader control), LOUD (loudness function) and DSP (digital
signal processor) by turning the VOLUME control.
Loudness function:
LOUD ON: The loudness function is active.
LOUD OFF: The loudness function is inactive. The sound is not influenced.

At low volumes the human ear does not perceive very low and very high sounds well. An increase of
the frequency range for low volume (loudness correction) counteracts this effect and the music replay
sounds more natural.
DSP function:
FLAT
CLASSICS
POP M
ROCK M
DSP OFF
Signal processor on, linear frequency response
Pre-settings for classical music
Pre-setting for pop music
Pre-setting for rock music
Signal processor off
59