Glp/Gmp Menu; Date Format; Date; Time Format - OHAUS Defender 5000-Serie Bedienungsanleitung

Defender 5000 Indicators
-2 = divide the Factor by 100 (1x10
-1 = divide the Factor by 10 (1x10
0 = multiply the Factor by 1 (1x10
1 = multiply the Factor by 10 (1x10
2 = multiply the Factor by 100 (1x10
Least Significant Digit (LSD)
Set the graduation.
Settings of 0.5, 1, 2, 5, 10, 100 are available.
The Custom Unit's name can be customized up to 3 characters.
Note: Custom Unit is locked at Off position when the Security Switch is set to the locked position.
Custom Unit is not available when Range is set to Dual interval.
Set the status.
Off = Disabled
On = Enabled

3.8 GLP/GMP Menu

Enter this menu to set the Good Laboratory Practice (GLP) or Good Manufacturing Practice (GMP)
data.

3.8.1 Date Format

Set the date format.
MM/DD/YYYY = Month.Day.Year
DD/MM/YYYY = Day.Month.Year
YYYY/MM/DD = Year.Month.Day

3.8.2 Date

Set the date.
00 to 9999 = year position
01 to 12 = month position
01 to 31 = day position
Refer to Section 3.2 Menu Navigation to enter settings.

3.8.3 Time Format

Set the time format.
24 hr = 24 hour format.
12 hr = 12 hour format.

3.8.4 Time

Set the time.
24 hour format
00 to 23 = hour position
00 to 59 = minute position

3.8.5 Project ID

Set the Project identification.
Refer to Section 3.2 Menu Navigation to enter settings.

3.8.6 Scale ID

Set the Project identification.
Refer to Section 3.2 Menu Navigation to enter settings.
-2
)
-1
)
0
)
1
)
2
)
EN-29