PX Series Balance
5.6.16 Tare
On = the tare weight is printed.
Off = the tare weight is not printed.
5.6.17 Line Feed
1 Line
= move the paper up one line after printing.
4 Lines = move the paper up four lines after printing.
5.6.18 Signature Line
On = the Signature Line is printed.
Off = the Signature Line is not printed.
5.7 GLP
Enter this menu to set the Good Laboratory Practices (GLP).
Header
5.7.1
Enables the printing of GLP headings. There are up to 5 headings available.
Alphanumeric settings up to 25 characters are available for each Header setting
5.7.2 Balance Name
Set the balance name.
Alphanumeric settings up to 16 characters are available.
5.7.3 User Name
Set the user name.
Alphanumeric settings up to 16 characters are available. The default is blank.
5.7.4 Project Name
Set the project name.
Alphanumeric settings up to 16 characters are available. The default is blank.
5.8 Factory Reset
Use this sub-menu to reset the all menu settings to their Factory default settings.
Reset All = resets all menus to their factory default settings.
Exit = return to application main screen without resetting any menus.
5.9 Lockout
Use this sub-menu to lock/unlock certain menus.
Off = the menu is unlocked
On = the menu is locked
EN-31