Rs485 Configuration; Ethernet Configuration; Wifi Configuration; Bluetooth Configuration - OHAUS Defender 5000-Serie Bedienungsanleitung

EN-34
3.9.2.14 Reset
Reset the settings to factory default.

3.9.3 RS485 Configuration

Please refer to RS485 Configuration in the Defender
Manual.

3.9.4 Ethernet Configuration

Please refer to Configuration in the Defender

3.9.5 Wifi Configuration

Please refer to Wifi Configuration in the Defender

3.9.6 Bluetooth Configuration

Please refer to Bluetooth Configuration in the Defender
Note: When you select Bluetooth, the pin code window will only be displayed in measuring modes.

3.9.7 Analog Configuration

Please refer to Analog Configuration in the Defender

3.10 Maintenance Configuration

Please refer to Service Manual TD52P TD52XW indicator for Service Menu information.

3.11 Lock Key Configuration

This menu is used to lock access to certain keys. When you select ON for one selection, the
associated key press will be ignored.
If you select Lock All Keys, you will lose function of all keys.
If you select Lock Off key, you will lose function of the Off key.
Item Available Settings
(bold is the default settings)
Lock All Keys Off, On
Lock Off Key Off, On
Lock Zero Key Off, On
Lock Print Key Off, On
Lock Unit Key Off, On
Lock Soft Key Off, On
Lock Mode key Off, On
Lock Tare key Off, On
Lock Menu key Off, On
Reset No/Yes
Note: If the Menu key has been locked, Please refer to Service Manual TD52P TD52XW indicator
for more information.
®
5000 RS232/RS485/USB Interface Instruction
®
5000 Ethernet Interface Instruction Manual.
®
5000 USB Host Instruction Manual.
®
5000 USB Host Instruction Manual.
®
5000 Analog Kit Instruction Manual.
Defender 5000 Indicators