Unit Menu; Glp/Gmp Menu - OHAUS Defender 6000 Bedienungsanleitung

Defender 6000 Indicators
4.5

Unit Menu

U.N.I.t
Enter this menu
Reset
Gram (g)
Kilogram (kg)
Pound (lb)
Ounce (oz)
Pound:Ounce (lb:oz)
Tonne (t) （only available for i-DT61PW model）
End
Note:
 Due to national laws, the indicator may not include some of the units listed.
If the Security Switch is turned on, the Units are locked at their current setting.

 Available units vary by model and local regulations.
4.6

GLP/GMP Menu

Enter this menu to set the Good Laboratory Practice (GLP) or Good Manufacturing Practice (GMP) data.
[ ]
rESEt
Reset
If Reset is selected and confirmed, all the submenu value will be set to default.
[
d.FmMt
Data Format
Set the date format.
[mMDY]
MDY = Month.Day.Year
[DmMY]
DMY = Day.Month.Year
[YmMd]
YMD = Year.Month.Day
[ ]
Date
Date
Set the date according to the previous Date Format you set.
For example, you set YMD (Year. Month. Day) for the Date Format, and the data you are going to input is
2020/4/17.
Then set the date as: 20.04.17 (Year. Month. Day)
[
t.FmMt
Time Format
Set the time format.
24 hr = 24 hour format.
12 hr = 12 hour format.
[ ]
timMe
Time
Set the time.
24 hour format
00 to 23 = hour position
00 to 59 = minute position
12 hour format:
00 to 12 = hour position
00 to 59 = minute position
For how to input the number of the time, please refer to the following project ID section for details.
Note: for i-DT61XWE model, you cannot use the numeric keyboard to input the time.
to activate the desired units.
]
]
EN-35