Filling; Establishing Target Weights; Application Setup - OHAUS Defender 5000-Serie Bedienungsanleitung

Defender 5000 Indicators

4.5 Filling

Use this application to fill a container to a pre-determined target weight.
Press the button
corresponding to Filling is displayed in the upper
left portion of the home screen.
Establish the four target weights SP1, SP2, SP3
and SP4 according to section 4.5.1. Then place
a container on the pan, perform tare and fill the
container until all the four target weights are
reached.

4.5.1 Establishing target weights

Press the Softkey corresponding to the icon
to enter the sub-menu for setting the
.
target weight
Press the Softkey corresponding to the icon
to input SP1's value. Input through the numeric
keyboard and then press the icon
Repeat the step above to set values for SP2, SP3
and SP4. When you finish, press the Softkey
corresponding to the icon
the sub-menu.

4.5.2 Application Setup

The Application can be customized for various user preferences.
Press the Softkey corresponding to the icon
to enter Configuration
Select the list item and press the Softkey
corresponding to the icon
settings as desired.
To return to the Application home screen, press
the Softkey corresponding to the icon
until the icon
to confirm.
to confirm and exit
.
to change the
.
EN-51