Counting; Set The Average Piece Weight (Apw) - OHAUS Defender 5000-Serie Bedienungsanleitung

EN-38

4.2 Counting

Use this application to count samples of uniform weight.
Press the button
corresponding to Counting is displayed in the
screen.
The default (or last) Average Piece Weight (APW) is
displayed.
Set the APW value according to section 4.2.1 and
then place objects on the pan to display the number
of pieces.

4.2.1 Set the Average Piece Weight (APW)

Note: It is recommended that the APW is larger than 1d. If APW is between 0.05d and 1d, a warning
message will be displayed and the information line will show 'APW is too small!'. If APW is less than
0.05d, an error message will appear and the APW value cannot be stored.
There are two methods to set the APW:
1. Entering a Known APW
Method 1
Key in the Piece Weight using the alphanumerical
keypad.
Then press the Softkey corresponding to the icon
.
Method 2
Alternatively, first press the Softkey corresponding
to the icon
setting the APW.
Press the Softkey corresponding to the icon
edit the APW value using the alphanumerical
keypad.
After editing, press the Softkey corresponding to
the icon for confirmation, and then press the
Softkey corresponding to the icon
sub-menu.
until the
to enter the sub-menu for
to exit the
icon
to
Defender 5000 Indicators