Filter Level; Auto Zero Tracking; Auto Dim; Screensaver - OHAUS Defender 5000-Serie Bedienungsanleitung

Defender 5000 Indicators

3.5.3 Filter Level

Set the amount of signal filtering.
Low = faster stabilization time with less stability.
Medium = normal stabilization time with normal stability.
High = slower stabilization time with more stability.

3.5.4 Auto Zero Tracking

Set the automatic zero tracking functionality.
OFF
0.5division
1d
3d

3.5.5 Auto Dim

Set the display backlight functionality.
Settings:
1 min = backlight turns off after 1 minute of no activity.
2 min = backlight turns off after 2 minute of no activity.
5 min = backlight turns off after 5 minute of no activity.
10 min = backlight turns off after 10 minute of no activity.
Always on
Off

3.5.6 ScreenSaver

Set whether the screensaver is enabled after the selected time period.
Off = Disabled.
5 min = the screensaver is enabled after 5 minutes.
10 min = the screensaver is enabled after 10 minutes.
30 min = the screensaver is enabled after 30 minutes.

3.5.7 Auto Off

Set whether the display enters sleep mode after the selected time period.
Off = Disabled.
5 min = the display enters sleep mode after 5 minutes.
10 min = the display enters sleep mode after 10 minutes.
30 min = the display enters sleep mode after 30 minutes.

3.5.8 Adjust Contrast

Set the contrast degree of the display.
1
2
3
4
5

3.5.9 Reset

Reset all settings to factory default settings.
Yes = Reset.
No = Do not reset.
NOTE: If the Security Switch is set to ON, Stability, Zero Range, Filter Level and Auto Zero Track
settings are not reset.
= disabled.
= the display will maintain zero until a change of 0.5 division per second has
been exceeded.
= the display will maintain zero until a change of 1 division per second has
been exceeded.
= the display will maintain zero until a change of 3 divisions per second has
been exceeded.
EN-25