Troubleshooting Table - hanseatic HVRB25SS Gebrauchsanleitung

Troubleshooting table

Malfunctions can occur in all electrical appliances. This does not
necessarily mean there is a defect in the appliance. For this reason,
please check the tables to see if you can correct the malfunction.
WARNING
Risk of electric shock in case of improper repair!
Never try to repair a defective or suspected defective appli-
ance yourself. You can put your own and future users' lives in
danger. Only authorised specialists are allowed to carry out
this repair work.
Problem
Appliance is not work-
ing.
Appliance switches it-
self off.
Suction force is weak.
Dust is escaping from
the appliance.
Troubleshooting table Page EN-29
Possible cause
Appliance is switched
off.
Battery performance is
too low.
Brush/floor nozzle
blocked.
Filter blocked. Overheat
protection has been ac-
tivated.
Battery performance is
too low.
Filter is inserted incor-
rectly or is contaminat-
ed.
Battery performance is
too low.
Filter is inserted incor-
rectly or is contaminat-
ed.
Solutions, tips
Switch the appliance
on.
Place the appliance in
the charging station and
charge the battery.
Switch the appliance
off, clean brush/floor
nozzle.
Switch the appliance
off, leave to cool for at
least 30 minutes, and
clean the filter.
Place the appliance in
the charging station and
charge the battery.
Insert filters correctly
and/or clean.
Place the appliance in
the charging station and
charge the battery.
Insert filters correctly
and/or clean.