Troubleshooting Table - hanseatic VC-PD510-1 Gebrauchsanleitung

Troubleshooting table

Malfunctions can occur in all electrical appliances. This does not
necessarily mean there is a defect in the appliance. For this reason,
check the tables to see if you can correct the malfunction.
WARNING
Risk of electric shock in case of improper repair!
Never try to repair a defective or suspected defective appli-
ance yourself. You can put your own and future users' lives in
danger. Only authorised specialists are allowed to carry out
this repair work.
Problem
Appliance is not
working.
Appliance
switches itself
off.
Possible cause
Appliance is not switched
on.
Brush/nozzle blocked.
Dust filter is blocked. Over-
heat protection has been
activated.
Tube extension is plugged.
Troubleshooting table Page EN-25
Solutions, tips
Switch the appliance on.
Switch the appliance off
and clean the brush/
nozzle.
Switch the appliance off,
leave to cool for at least
30 minutes, and clean the
motor protection filter.
Switch the appliance off,
check if the tube extension
for blockages, and clean if
necessary.