Troubleshooting Table - hanseatic HVBBA8008EU Gebrauchsanleitung

Troubleshooting table

Malfunctions can occur in all electrical appliances. This does not necessarily mean there is a
defect in the appliance. For this reason, please check the tables to see if you can correct the
malfunction.
WARNING
Risk of electric shock in case of improper repair!
Never try to repair a defective or suspected defective appliance yourself. You can put
your own and future users' lives in danger. Only authorised specialists are allowed to
carry out this repair work.
Problem Possible cause
On/Off foot switch does
not actuate.
Mains plug is loose.
Appliance is not
working.
The socket is defective.
Mains cord is defective.
Brush/nozzle blocked.
Appliance switches
itself off.
Telescopic tube/suction
hose is blocked.
Brush/nozzle is not
positioned correctly.
Object is plugging the
nozzle.
Suction force is
weak.
Filters are inserted
incorrectly or are
contaminated.
Air by-pass vent is open. Close the air by-pass vent.
Dust is being Filters are inserted
released from the incorrectly or are
appliance. contaminated.
There is a whistling This is not a malfunction and stops after a while.
sound.
Troubleshooting table
Solutions, tips
Switch the appliance on.
Check that the mains plug is firmly inserted
into the socket.
Try the appliance with a different socket.
Check fuses and/or circuit breakers.
Check mains cord for damage. Contact
our Service Centre, where necessary (see
page EN-22).
Actuate On/Off foot switch, pull out mains
plug, clean brush/nozzle.
Actuate On/Off foot switch, pull out mains
plug, check telescopic tube and suction hose
for blockage, and clean if necessary.
Position the brush/nozzle correctly.
Actuate On/Off foot switch, pull out mains
plug, check telescopic tube and suction hose
for blockage. Remove object.
Insert filters correctly and/or clean.
Insert filters correctly and/or clean.
Page EN-21