Troubleshooting Table - hanseatic HVSR150CJ Gebrauchsanleitung

Page EN-28

Troubleshooting table

Troubleshooting table
Malfunctions can occur in all electrical appliances. This does not nec-
essarily mean there is a defect in the appliance. For this reason, please
check the tables to see if you can correct the malfunction.
WARNING
Risk of electric shock in case of improper repair!
Never try to repair a defective or suspected defective appli-
ance yourself. You can put your own and future users' lives in
danger. Only authorised specialists are allowed to carry out
this repair work.
Problem
Appliance is not work-
ing.
Appliance switches it-
self off.
Suction force is weak.
Dust is escaping from
the appliance.
In rare cases this can make a whistling noise initially. This is not a
malfunction and stops after a while.
Possible cause
Appliance is switched
off.
Battery performance is
too low.
Battery performance is
too low.
Floor nozzle is not posi-
tioned correctly.
Object is plugging the
floor nozzle.
Battery performance is
too low.
Filters are inserted in-
correctly or are contam-
inated.
Filter is inserted incor-
rectly or is contaminat-
ed.
Solutions, tips
Switch the appliance
on.
Charge the battery.
Charge the battery.
Position the floor nozzle
correctly.
Switch the appliance
off and check the floor
nozzle for obstructions.
Remove object.
Charge the battery.
Insert filters correctly
and/or clean.
Insert filters correctly
and/or clean.