Page EN-14
Appliance parts
Control panel displays
Display
and
switched
off
lights up blue
flashes blue
pulses blue
lights up blue
and
flash red
and
switched
off
Meaning
Switched off
Switched on
Low battery
charge
Charging
Charged
Error message Refer to the "Troubleshooting
Idle state
Action
The On/Off switch (7) is in
the "O" position. Move the
switch to the "I" position to
switch it on.
The On/Off switch (7) is in
the "I" position. Move the
switch to the "O" position to
switch it on.
Let the vacuum return to the
charging station or insert it in
the charging station. Press
to start the charging pro-
cess.
The battery is charging.
Battery is charged.
table".
After 5 minutes in standby
mode, the appliance auto-
matically goes into sleep
mode. The On/Off switch (7)
is in the "I" position.