Troubleshooting Table - hanseatic V18C01A-80 Gebrauchsanleitung

Troubleshooting table

Malfunctions can occur in all electrical appliances. This does not
necessarily mean there is a defect in the appliance. For this reason,
please check the tables to see if you can correct the malfunction.
WARNING
Risk of electric shock in case of improper repair!
Never try to repair a defective or suspected defective appli-
ance yourself. You can put your own and future users' lives in
danger. Only authorised specialists are allowed to carry out
this repair work.
Problem
Appliance is not
working.
Appliance
switches itself
off.
Possible cause
On/Off foot switch
does not actuate.
Mains plug is loose.
The socket is
defective.
Mains cord is
defective.
Brush/nozzle
blocked.
Coarse dust filter
blocked. Overheat
protection has been
activated.
Telescopic tube/
suction hose is
blocked.
Troubleshooting table Page EN-25
Solutions, tips
Switch the appliance on.
Check that the mains plug is firmly
inserted into the socket.
Try the appliance with a different
socket.
Check fuses and/or circuit break-
ers.
Check mains cord for damage.
Contact our Service Centre, where
necessary (see "Service" on
page EN-27).
Actuate On/Off foot switch, pull out
mains plug, clean brush/nozzle.
Actuate On/Off foot switch, pull out
mains plug, leave appliance to cool
for at least 1/2 hour and clean the
coarse dust filter.
Actuate On/Off foot switch, pull out
mains plug, check telescopic tube
and suction hose for blockage, and
clean if necessary.