Troubleshooting Table - hanseatic VC-PD510-2 Gebrauchsanleitung

Troubleshooting table

Malfunctions can occur in all electrical appliances. This does not
necessarily mean there is a defect in the appliance. For this reason,
check the tables to see if you can correct the malfunction.
WARNING
Risk of electric shock in case of improper repair!
Never try to repair a defective or suspected defective appli-
ance yourself. You can put your own and future users' lives in
danger. Only authorised specialists are allowed to carry out
this repair work.
Problem
Appliance is not work-
ing.
Appliance switches
itself off.
Troubleshooting table Page EN-33
Possible cause
Appliance is switched
off.
Battery performance is
too low.
Brush/nozzle blocked.
Dust filter is blocked.
Overheat protection
has been activated.
Tube extension is
plugged.
Battery performance is
too low.
Solutions, tips
Switch the appliance
on.
Charge the battery.
Switch the appliance
off and clean the brush/
nozzle.
Switch the appliance
off, leave to cool for at
least 30 minutes, and
clean the motor protec-
tion filter.
Switch the appliance
off, check the tube ex-
tension for blockages,
and clean if necessary.
Charge the battery.