Pushing The Device (Without Self-Propulsion); Installing The Side Brush; Device Description; Device Illustration - Kärcher KM 85/50 W Bp Originalbetriebsanleitung

Device cover, removed
1
Swivel bearings (2x)
2
Mount for swivel bearing
3
1. Opening the cover: Grasp the device cover by the recessed
grip and slowly swivel it forward. The swivel bearings hold the
device cover in its end position.
2. Removing the cover: Swivel the device cover forwards until
just before the end position, then remove it upwards.
3. Closing the cover: Slowly swivel the device cover back.

Pushing the device (without self-propulsion)

The drive must be deactivated to push the device. This is done
with a lever mechanism that decouples the drive.
Figure: Lever position up - device can be pushed
Lever
1
Push handle
2
1. Switch off the device and remove the key from the key-operat-
ed switch.
2. Open the cover.
3. Push the lever up. The drive is decoupled and the push handle
is locked.
4. Device can be pushed.
5. After moving, push the lever down again.

Installing the side brush

The side brush(es) are not attached to the device on delivery.
They are in the waste container.
1. Attach the side brushes to the device before initial startup. See
chapter "Readjusting/changing the side brushes".

Device description

Device illustration

The device is available in 4 different versions:
● KM 85/50 W Bp (1.351-116.0)
Without batteries and charger, with 1 side brush
● KM 85/50 W Bp *IN (1.351-118.0)
Without batteries and charger, with 1 side brush
● KM 85/50 W Bp Pack (1.351-117.0)
With batteries and charger, with 1 side brush
● KM 85/50 W Bp Pack 2SB (1.351-119.0)
With batteries and charger, with 2 side brush
Cover
1
Right side brush
2
– Swivels inwards on contact (protection against damage)
Steering roller
3
Sealing strips
4
Drive wheels
5
Charging plug
6
"Homebase" holder
7
Storage space (max. 5 kg)
8
Coarse dirt flap lever
9
Push handle
10
Brake/parking brake lever
11
Batteries
12
Only with variants 1.351-117.0 and 1.351-119.0
Charger
13
Only with variants 1.351-117.0 and 1.351-119.0
Left side brush
14
Only with variant 1.351-119.0
– Swivels inwards on contact (protection against damage)
Key-operated switch
1
Charge monitoring display for battery
2
Storage
3
Roller brush lever
4
Side brush lever
5
Drink holder
6
Blower "on/off" rotary switch
7
English

Control elements

19