Explanation Of The Pictograms On The Machine - Baier ABDB 82 Original Bedienungsanleitung

2.7.10 Explanation of the pictograms
on the machine
Protection class II equipment
The machine is insulated in such a way
that it has no exposed metal parts that
could be live in the event of a fault. It does
not have a protective earth conductor.
The CE mark on a product means that the
product conforms with all the applicable
European regulations and has been
subjected to the prescribed conformity
assessment procedures.
EAC is an abbreviation for Eurasian
Conformity
With the EAC marking the producer,
distributor or authorised representative
declares that the product being placed on
the market within the area of the Eurasian
Economic Union for the first time, meets
the relevant safety requirements specified
in the technical standards of the Eurasian
Economic Union.
Environmentally friendly disposal of
waste equipment
Protect the environment, do not throw
electric tools and battery packs into the
household waste. Follow the national
regulations on separate collection
and recycling of no longer used
machines, battery packs, packaging and
accessories.
Before disposing of the power tool,
discharge the battery pack in it. Secure
the contacts against short-circuit (e.g.
insulate with adhesive tape).
Wear hearing protection!
The typical A-weighted sound pressure
level of this power tool is over 85 dB (A)
– wear ear protectors when working with
the tool!
Read the instruction manual!
Before starting any work with or on the
machine, this instruction manual, the
safety instructions and the warnings must
be read through carefully and observed.
ABDB 82, V01 / 2021-03 | 33 |