Baier ABDB 82 Original Bedienungsanleitung Seite 25

Contents
1 About this instruction manual ........... 26
1.1 Important information ............................. 26
1.2 Symbols used in the instruction manual 26
2 Safety Instructions .............................. 26
2.1 Workplace safety .................................... 27
2.2 Electrical safety ...................................... 27
2.3 Safety of people ...................................... 27
2.4 Using and handling the power tool ......... 28
2.5 Using and handling the cordless tool ..... 28
2.6 Service .................................................... 29
2.7 Safety instructions for cordless dry
diamond drills ......................................... 29
2.7.1 Operating personnel requirements ........ 29
2.7.2 Safety instructions for all work ............... 29
2.7.3 Workplace safety .................................... 29
2.7.4 Electrical safety ...................................... 30
2.7.5 Safety of people ...................................... 30
2.7.6 Hazards when using and handling the
cordless power tool ................................ 31
2.7.7 Hazards when using and handling the
battery pack ............................................ 32
2.7.8 Safety instructions for using long drill
bits .......................................................... 32
2.7.9 Service / Maintenance / Repair .............. 32
2.7.10 Explanation of the pictograms on the
machine .................................................. 33
3 Technical Characteristics ................... 34
3.1 Technical specifications ......................... 34
3.2 EU Declaration of Conformity ................ 35
3.3 Machine characteristics ......................... 35
3.4 Machine parts and controls .................... 35
3.5 Intended use ........................................... 35
4 Before Starting Work ........................... 36
4.1 Charging the battery pack ...................... 36
4.2 Adjusting the additional handle .............. 36
4.3 Connecting the dust extractor ................ 36
4.4 Fitting and dismantling the socket
outlet drill bit ........................................... 37
4.5 Inserting the centring pin ........................ 37
4.6 Switching hammer drilling on and off ..... 37
5 Operation and Control ......................... 38
5.1 Inserting and removing the battery
pack into/from the machine .................... 38
5.2 Starting Drilling ....................................... 38
5.3 Ending the drilling process ..................... 39
6 Cleaning ................................................. 39
ABDB 82, V01 / 2021-03
7 Maintenance .......................................... 39
8 Handling the diamond socket
outlet drill bit ......................................... 40
9 Accessories .......................................... 40
10 Disposal ................................................. 40
11 Scope of Supply ................................... 41
12 Warranty ................................................ 42
Imprint
Version V01 / 2021-03
Copyright:
Maschinenfabrik
OTTO BAIER GmbH
Heckenwiesen 26
71679 Asperg
Germany
It is prohibited to forward or reproduce this
document or to exploit and disclose its contents,
unless expressly permitted. Any infringements will
result in liability to pay compensation for damages.
All rights reserved in case of patent, utility model or
design registration.
This instruction manual has been prepared with
the greatest possible care. Nonetheless, OTTO
BAIER GmbH does not accept any liability
whatsoever for possible errors in this instruction
manual and their consequences. Equally, no liability
whatsoever is accepted for direct or consequential
damage or losses resulting from improper use of the
machine.
The national health and safety regulations and the
requirements of this instruction manual are to be
observed when using the machine.
All product names and brand names used are the
property of the holder and are not explicitly marked
as such.
Subject to change without notice.
| 25 |