Hazards When Using And Handling The Cordless Power Tool - Baier ABDB 82 Original Bedienungsanleitung

•
Do not leave the power tool running while
you are carrying it.
Your clothing can get caught by inadvertent
contact with the rotating insert tool and the
insert tool can drill into your body.
•
If the machine is switched on, do not direct
insert tools towards your own or other
people's bodies. Do not touch or take hold
of the tools.
•
Always use the additional handle supplied
with the tool.
Loss of control of the machine can result in
injuries.
2.7.6 Hazards when using and
handling the cordless power
tool
•
Remove the battery pack from the machine
before making any adjustment, retooling,
servicing or cleaning.
•
Check that the machine is switched off on
inserting the battery pack.
•
If the machine is used for hand-held
drilling, always hold both handles firmly
when switching on and while working with
the machine. (The additional handle must
be tightly screwed onto the drill!). When
switching on and while working with the
machine, expect reaction torques (e.g. due
to sudden jamming or breakage of the insert
tool).
•
If the insert tool becomes blocked, stop
exerting feed and switch off the tool.
Check the reason for the jamming and remove
the cause of jammed insert tools.
•
If you want to restart a diamond drill, which
is in the workpiece, before switching on,
check whether the insert tool rotates freely.
If the insert tool jams, it possibly does not rotate
and this can cause overloading of the tool, or
can cause the diamond drill to detach itself from
the workpiece.
•
Do not use any accessories, which have not
been especially provided and recommended
for this power tool by the manufacturer.
Just because you can attach the accessories
to your power tool is not a guarantee of safe use.
ABDB 82, V01 / 2021-03
•
The approved speed of the insert tool must
be at least as high as the maximum speed
given on the power tool.
Accessories which rotate faster than approved
can break and fly off the tool.
•
Change insert tools carefully and only use
the mounting tools provided, if they are in
perfect condition. Remove the rechargeable
battery from the power tool before starting
to change the insert tool.
Use of the mounting tool provided prevents
damage to the power tool and insert tool.
•
Never use damaged insert tools. Before
each use, check insert tools for splinters
and cracks. If the power tool or insert tool
is dropped or falls, check whether it is
damaged, or use an undamaged insert tool.
If you have checked and inserted the insert
tool, keep yourself and other people nearby
outside the plane of the rotating insert tool
and let the power tool run at maximum speed
for one minute.
Most damaged insert tools break during this test
period.
•
Do not expose power tools to extreme heat
or cold.
Mechanical and electrical damage can occur
during extreme heat and/or cold.
•
Allow the insert tools, tool holders and other
parts cool in the immediate vicinity of the
work area after use.
The equipment can be very hot after use. Do not
touch or grip the parts. Risk of injury.
•
Additional signs or other, non BAIER-
specific parts may not be screwed or
riveted onto the motor, handle, gearbox or
protective housing.
This could damage the power tool and cause
malfunctions to occur.
•
Avoid unnecessary noise emissions.
•
Note and follow the safety and work
instructions for the accessories used.
| 31 |