2.7.4 Electrical Safety; 2.7.5 Safety Of People - Baier ABDB 82 Original Bedienungsanleitung

EN
•
Dust from materials such as coatings
containing lead, several types of wood,
minerals and metals can be harmful
to health and cause allergic reactions,
respiratory diseases and/or cancer.
Asbestos-containing material may only be
machined by specialists.
f Where possible use dust extraction suitable
for the material.
f Ensure the workplace is properly ventilated.
f We recommend wearing a face mask
respirator with filter class P2 or P3
(to EN 149:2001).
Observe the relevant regulations in your country
for the materials to be machined.

2.7.4 Electrical safety

•
Do not touch or short-circuit the contacts of
the battery pack!
•
Before each use, check the power tool for
damage.
Damaged equipment is dangerous, and no
longer safe to use.
•
Note the rechargeable battery voltage! The
rechargeable battery voltage must match
the details given on the rating plate of the
power tool.
•
Regularly clean the ventilation slots of your
power tool by blowing it out. Never use
liquids. Never insert screwdrivers or any
other objects into the ventilation slits. Do
not cover the ventilation slits.
The motor fan draws dust into the housing and
a large accumulation of metal dust can cause
electrical hazards.

2.7.5 Safety of people

•
Do not view LED radiation of the LED light
installed in the power tool directly with
optical instruments.
•
Never stare into the LED light while it is on.
•
Wear personal protective equipment and,
depending on the work situation, use:
Full-face protection, eye protection
or safety glasses/goggles, hard hat
and special apron
Protect yourself against debris thrown
up by wearing a hard hat, safety
goggles or face protection and wear an
apron, if necessary.
| 30 |
Hearing protection
The typical A-weighted sound
pressure level of this power tool is over
85 dB (A) while working with the tool.
If you are exposed to loud noise for
lengthy periods, there is a risk of
hearing damage or even hearing loss.
Anti-vibration safety glove
At a release value A (8) for arm-hand
vibrations of over 2.5 m/s
of anti-vibration safety gloves is
recommended.
Non-slip safety footwear
Dust mask, half-face filter mask or
face mask respirator
Inhaling fine mineral dust can cause
health damage. We recommend
wearing a face mask respirator with
filter class P2 or P3 (to EN 149:2001).
Dry drilling: Working with dry
diamond core drill bits / drill bits for
socket outlets is a grinding process in
which extremely fine dust is produced.
When cutting materials containing
quartz there is a very high risk of
silicosis; in this case the machine
should only be used in conjunction
with a suitable dust extractor.
•
Ensure other people keep a safe distance
from your work area. Any person entering
the work area must be wearing personal
protective equipment.
Broken pieces of the workpiece or broken insert
tools can fly off and cause injuries, even outside
the immediate work area.
•
Hold the power tool at the insulated handle
gripping surfaces when carrying out
work during which the insert tool can hit
concealed electrical cables.
Contact with a live conductor can also energise
metal parts of the tool and cause an electric
shock.
•
Never put down the power tool until the
insert tool has come to a complete standstill.
The rotating insert tool can come into contact
with the surface on which the power tool is
placed, which could cause you to lose control of
the power tool.
2
, the wearing
ABDB 82, V01 / 2021-03