Using And Handling The Power Tool; Using And Handling The Cordless Tool - Baier ABDB 82 Original Bedienungsanleitung

EN
g) If dust extraction and collection devices
can be installed, ensure that these are
connected and are used correctly.
Use of a dust extraction system can reduce the
hazards caused by dust.
h) Don't be lulled into a false sense of safety
and do not break the safety rules for power
tools even if, after much use, you are familiar
with the power tool.
Careless action can cause severe injuries within
fractions of a second.
2.4 Using and handling the power
tool
a) Do not overload the tool. Use the intended
power tool for your work.
You work better and safer within the given power
range if you use the suitable power tool.
b) Do not use a power tool whose switch is
defective.
A power tool which can no longer be switched
on or off is dangerous and must be repaired.
c) Remove the plug from the plug socket and/
or remove the battery before carrying out
tool adjustments, changing accessories or
placing the tool aside.
This precautionary measure prevents
unintentional starting of the power tool.
d) Store power tools out of the reach of
children when not in use. Do not allow
people to use the tool unless they are
familiar with it, or if they have not read this
instruction manual.
Power tools are dangerous if they are used by
inexperienced people.
e) Maintain power tools and insert tools with
care. Check whether moving parts are
in proper working order and do not jam,
whether parts are broken or damaged in
such a way that they impair the function of
the power tool. Have damaged parts repaired
before using the power tool.
Many accidents are caused by poorly serviced
and maintained power tools.
f) Keep cutting tools sharp and clean at all
times.
Carefully maintained cutting tools with sharp
cutting edges jam less easily and are easier to
control.
| 28 |
g) Use the power tool, accessories, insert
tools, etc. in accordance with this
instruction manual. Take into consideration
the working conditions and the work to be
carried out.
Use of power tools for other than the intended
applications can lead to dangerous situations.
h) Keep the handles and gripping surfaces dry,
clean and free from oil and grease.
Slippery handles and gripping surfaces prevent
safe operation and control of the power tool in
unforeseen situations.
2.5 Using and handling the cordless
tool
a) Only use chargers recommended by the
manufacturer to charge the rechargeable
batteries.
There is a risk of fire if a charger that is suitable
for a certain type of rechargeable batteries is
used to charge other rechargeable batteries.
b) Use the intended rechargeable batteries
only in the power tools.
Use of other rechargeable batteries can cause
injuries and a risk of fire.
c) While it is not in use, keep the rechargeable
battery away from paper clips, coins, keys,
nails, screws or other small metal objects
that could cause bridging of the contacts.
A short-circuit between the rechargeable battery
contacts can cause burns or fire.
d) Incorrect use can cause fluid to leak from
the rechargeable battery. Avoid contact with
the fluid. In case of accidental contact, rinse
off with water. If the fluid gets in the eyes,
seek medical help.
Leaking battery fluid can cause skin irritation or
burns.
e) Do not use damaged or modified
rechargeable batteries.
Damaged or modified rechargeable batteries
can behave in an unforeseeable way and lead to
fire, explosion or a risk of injury.
f) Do not expose a rechargeable battery to fire
or high temperatures.
Fire and temperatures above 130 °C can cause
an explosion.
ABDB 82, V01 / 2021-03