Safety Signs And International Symbols; Warning Symbol; Maximum Speed - Ikra XL 30 SSB Gebrauchsanweisung

SAFETY SIGNS AND INTERNATIONAL SYMBOLS

These Operating Instructions describe safety symbols and international symbols and pictographs that may be applied
to the device. Read the Operating Instructions to familiarise with all information concerning safety, assembly, operation,
maintenance and repair.
SYMBOLS
Downloaded from www.Manualslib.com
•
WEAR HEAD, EYE AND EAR PROTECTORS
WARNING: Hurled-away objects may lead to serious injuries of the eyes, excessive noise
may result in deafness. Wear eye and ear protection devices when operating this device.
Falling objects may cause serious injuries of the head; wear a head protection when
operating this device.
• WEAR FOOT PROTECTION AND GLOVES
Always wear safety boots and gloves when operating the device.
• READ THE OPERATING INSTRUCTIONS
If you do not adhere to the instructions and safety measures described in the Operating
Instructions severe injuries may occur. Read the Operating Instructions before you start
and operate this device.
• KEEP OTHER PERSONS ON A DISTANCE
WARNING: Take care that no other persons are standing within a radius of 15m around
your working area. This particularly applies to children and animals.
• DANGER OF INJURY !
Beware of hurled-away objects.
Keep bystanders away.
• Fire hazard!
The fuel is flammable and therefore may not be spilled.
Do not work next to open flames. Do not smoke. Only refill fuel when the motor is cool
and is not running.

• WARNING SYMBOL

Points to danger, warnings or reasons for particular carefulness. May be used in
connection with other symbols or pictographs.

• MAXIMUM SPEED

The maximum speed of the cutting unit. The device must not be operated at a speed higher
than this.
• Warning!
When using metal cutting tools (thicket blade) there is the danger of kickbacks if the tool
gets in touch with some solid object
• POSITION OF THE HANDLE
Direction of arrow shows how to install the handle. Always keep the right position, you
must never remain under the required distance!
• ATTENTION: HOT SURFACE
Never touch a hot exhaust pipe, gear box or cylinder. Otherwise, you may suffer burns.
These parts get extremely hot during operation and stay hot for some time after the device
has been switched off.
• DANGER OF INJURY !
Warning! Do not put hands under the cover of the machine when it is running
Caution! Rotating electrical too!
• Guaranteed acoustic capacity level L
112 dB(A)
manuals search engine
MEANING
WA
GB-2