Parkside PAS 4 D5 Bedienungs- Und Sicherheitshinweise Originalbetriebsanleitung Seite 29

Do not overreach. Keep proper
e)
footing and balance at all times.
This enables better control of the power
tool in unexpected situations .
Dress properly. Do not wear loose
f)
clothing or jewellery. Keep your
hair, clothing and gloves away
from moving parts. Loose clothes,
jewellery or long hair can be caught in
moving parts .
If devices are provided for the
g)
connection of dust extraction
and collection facilities, ensure
these are connected and properly
used. Use of dust collection can reduce
dust‑related hazards .
Do not let familiarity gained from
h)
frequent use of tools allow you to
become complacent and ignore
tool safety principles. A careless
action can cause severe injury within a
fraction of a second .
Power tool use and care
Do not force the power tool. Use
a)
the correct power tool for your
application. The correct power tool will
do the job better and safer at the rate for
which it was designed .
Do not use the power tool if the
b)
switch does not turn it on and off.
Any power tool that cannot be controlled
with the switch is dangerous and must be
repaired .
Disconnect the plug from the
c)
power source and/or the battery
pack, if detachable, from the
power tool before making
any adjustments, changing
accessories, or storing power
tools. Such preventive safety measures
reduce the risk of starting the power tool
accidentally .
Store idle power tools out of
d)
the reach of children and do not
allow persons unfamiliar with the
power tool or these instructions to
operate the power tool. Power tools
are dangerous in the hands of untrained
users .
Maintain power tools and
e)
accessories. Check for
misalignment or binding of
moving parts, breakage of parts
and any other condition that may
affect the power tool's operation.
If damaged, have the power tool
repaired before use. Many accidents
are caused by poorly maintained power
tools .
GB/IE 27