Safety Instructions; General Power Tool Safety Warnings - Parkside PAS 4 D5 Bedienungs- Und Sicherheitshinweise Originalbetriebsanleitung

m WARNING!
The vibration and noise emissions during
u
actual use of the power tool can differ
from the declared values depending on
the manner in which the tool is used,
especially what kind of workpiece is
processed .
Try to minimise exposure to vibration and
noise . Examples of measures to reduce
vibration include wearing gloves when
using the tool and limiting working time .
All parts of the operating cycle must be
taken into account (e .g . times when the
power tool is switched off and when it
is running idle in addition to the trigger
time) .

Safety instructions

˜ General power tool safety
warnings
m WARNING!
Read all safety warnings,
u
instructions, illustrations and
specifications provided with
this power tool. Failure to follow
all instructions listed below may result in
electric shock, fire and/or serious injury .
Save all warnings and instructions for
future reference.
The term "power tool" in the warnings refers to
your mains‑operated (corded) power tool or
battery‑operated (cordless) power tool .
Work area safety
Keep work area clean and well lit.
a)
Cluttered or dark areas invite accidents .
Do not operate power tools in
b)
explosive atmospheres, such as in
the presence of flammable liquids,
gases or dust. Power tools create
sparks which may ignite the dust or fumes .
Keep children and bystanders
c)
away while operating a power
tool. Distractions can cause you to lose
control .
Electrical safety
Power tool plugs must match the
a)
outlet. Never modify the plug in
any way. Do not use any adapter
plugs with earthed (grounded)
power tools. Unmodified plugs and
matching outlets will reduce risk of electric
shock .
GB/IE 25