Parkside PAS 4 D5 Bedienungs- Und Sicherheitshinweise Originalbetriebsanleitung Seite 28

Avoid body contact with earthed
b)
or grounded surfaces, such as
pipes, radiators, ranges and
refrigerators. There is an increased risk
of electric shock if your body is earthed or
grounded .
Do not expose power tools to rain
c)
or wet conditions. Water entering a
power tool will increase the risk of electric
shock .
Do not abuse the cord. Never use
d)
the cord for carrying, pulling or
unplugging the power tool. Keep
cord away from heat, oil, sharp
edges or moving parts. Damaged or
entangled cords increase the risk of electric
shock .
When operating a power tool
e)
outdoors, use an extension cord
suitable for outdoor use. Use of a
cord suitable for outdoor use reduces the
risk of electric shock .
If operating a power tool in a
f)
damp location is unavoidable, use
a residual current device (RCD)
protected supply. Use of an RCD
reduces the risk of electric shock .
26 GB/IE
Personal safety
Stay alert, watch what you are
a)
doing and use common sense
when operating a power tool. Do
not use a power tool while you are tired
or under the influence of drugs, alcohol or
medication . A moment of inattention while
operating power tools may result in serious
personal injury .
Use personal protective
b)
equipment. Always wear eye
protection. Protective equipment such as
dust mask, non‑skid safety shoes, hard hat,
or hearing protection used for appropriate
conditions will reduce personal injuries .
Prevent unintentional starting.
c)
Ensure the switch is in the
off‑position before connecting
to power source and/or battery
pack, picking up or carrying the
tool. Carrying power tools with your
finger on the switch or energising power
tools that have the switch on invites
accidents .
Remove any adjusting key or
d)
wrench before turning the power
tool on. A wrench or a key left attached
to a rotating part of the power tool may
result in personal injury .