General Description; Scope Of Delivery; Function Description; Summary - Parkside PNTS 250 C2 Originalbetriebsanleitung

General description

The illustrations can be found
on the front and rear fold-out
pages.

Scope of delivery

Unpack the equipment and check that it is
complete. Dispose of the packaging mate-
rial correctly.
• Device with pre-assembled grinding
discs
• Spark protection
• Assembly material for mounting the
spark protection on the machine
- adjusting screw incl. washer and
snap ring, nut
• Workpiece support
• Assembly material for mounting the
workpiece support on the machine
- star grip nut, washer, lock washer
and screw
• Rubber cap for water tank
• Instruction Manual

Function description

The wet/dry grinder is a combined device
that is equipped with a dry grinding disc
and a wet grinding disc with different
grain sizes for coarse and fine grinding.
The device is provided with a spark protec-
tion and protective hoods for the protection
of the user.
For the function of the operating parts,
please refer to the descriptions below.

Summary

1 Wet grinding disc
2 Spark protection
3 Adjusting screw nut for spark
protection
4 Dry grinding disc cover
5 Dry grinding disc
6 Workpiece support
7 Star grip nut to mount/adjust the
workpiece support
8 On/off switch
9 Drillholes for table mounting
10 Rubber foot (water tank)
11 Rubber cap for water tank
12 Power cable
13 Water tank
14 Lock washer
15 Washer
16 Mounting screw for workpiece
support
17 Nut
18 Spark protection holder
19 Washer
20 Spring ring
21 Adjusting screw for spark protec-
tion fastener
22 Grinding disc nut
23 Clamping flange
24 Intermediate layers made of
cardboard
25 Protective hood for dry grinding
disc
26 Clamping flange made of plastic
27 Clamping flange made of plastic
28 Gear unit housing
29 Washer
GB IE
23