P4
7.5 Software update
To update the fixture via PC/Notebook, a upgrade dongle (USB/DMX converter) with software is
required. The upgrade dongle has to be connected to the fixture with a 5 pin XLR connector. The
software for the products is available from the JB-Lighting homepage at www.jb-lighting.de.
7.6 Verifying electronic devices
In accordance with the applicable German safety regulations (Accident Prevention and Insuran-
ce, BGV A2/A3), electrical installation and equipment have to undergo inspection at regular in-
tervals. For this purpose, the fixing screw of the 5-pin DMX socket may serve as measuring point
for the insulation and fault current measurement. This screw is connected to all sheet metal parts
by means of a contact disc.
- 56 -
PE - measurement point