Assembling The Ve 2 - Bosch Rexroth PE 2 Montageanleitung

1. Position a workpiece
pallet on the PE 2.
2. Slide the preassembled
VE 2/... stop gate in the
groove of the section
against the reference
edge of the workpiece
pallet.
3. Tighten the screws of
the stop gate.
7.5.3 Assembling the VE 2/... stop gate
Fig. 6: Assembling the VE 2/... stop gate.
Assembly
0,3
3 842 358 722/2015-05, MIT: PE 2, Bosch Rexroth AG
19/32
358 722-04