Designations; Notes On Safety; About This Chapter; Intended Use - Bosch Rexroth PE 2 Montageanleitung

1.3.3

Designations

This documentation uses the following designations:
Table 4: Designations
Designation Meaning
PE 2 Positioning unit from the Rexroth TS 2plus transfer system

2 Notes on Safety

2.1 About this chapter

The product has been manufactured according to the accepted rules of current
technology. Even so, there is a risk of injury or damage if this chapter and the safety
information in these instructions are not observed.
Read these instructions completely and thoroughly before working with the
product.
Keep this documentation in a location where it is accessible to all users at all
times.
Always include the operating instructions when you pass the product on to third
parties.

2.2 Intended use

This product is an incomplete machine.
The product may be used as follows:
• For installation in a Rexroth TS 2plus transfer system
• For the positioning of Rexroth WT 2 workpiece pallets
• Maximum load/section load: see Technical data on page 30
• For ambient conditions, see page 30
The product is intended exclusively for professional applications and not designed
for private use.
Intended use includes having read and understood these instructions, especially
chapter 2 "Notes on Safety".

2.3 Improper use

Any use other than described in section "Intended use" is considered improper and
is not permitted.
Bosch Rexroth AG is not liable for any damages resulting from improper use.
The user alone bears the risks of improper use of the product.
The following foreseeable cases of misuse are also considered improper use:
• Transport of goods other than those specifi ed.
• Persons riding on the product or transported material.
• Persons climbing on the product
– walking on the product is not permitted.
• Personal use of the product.
Notes on Safety
3 842 358 722/2015-05, MIT: PE 2, Bosch Rexroth AG
7/32