Product Identifi Cation; Transport And Storage; Transporting The Product; Storing The Product - Bosch Rexroth PE 2 Montageanleitung

14/32

Transport and Storage

A: Material number
(order number)
B: Designation
C: Information about version
and dimensions
Bosch Rexroth AG, MIT: PE 2, 3 842 358 722/2015-05
5.3 Product identifi cation
. . .
. . . . . . . .
Fig. 3: Name plate
6 Transport and Storage
• Observe the transport instructions on the packaging.
• See the shipping documents for transport weight.
• Secure the product to prevent toppling!
• When storing and transporting the product, always observe the ambient
conditions, see page 30.

6.1 Transporting the product

Lifted loads may fall!
Falling objects may result in severe injuries (or even death).
Always use lifting equipment with a suffi ciently high load bearing capacity
(see the shipping documents for product weight).
Before lifting the product, make sure that the carrying straps are correctly
fastened!
Secure the product to prevent toppling while lifting!
Make sure that no one is in the danger area when raising and lowering, with the
exception of the operator!

6.2 Storing the product

• Only store the product on a fl at surface.
• Protect the product against mechanical infl uences.
• Protect the product against environmental infl uences such as contamination and
humidity.
• Observe the ambient conditions, see page 30.
A
. . . . . . . . . . . . . . . . .
. . . . . . . . .
. . . . . . . . . . . . . .
C
WARNING
B
. . . .
. . . .
Typschild