Assembling The Product; Assembling The Pe 2 Positioning Unit - Bosch Rexroth PE 2 Montageanleitung

Note:
• The PE 2 is direction

dependent ( E,
mounting orientation).
• Use height compensation
(D) according to the
installation situation.
• Support the PE 2 during
assembly, and in the
process of aligning it, until
all screws are tightened.
Assemble the PE 2.

7.5 Assembling the product

7.5.1

Assembling the PE 2 positioning unit

3x
SW13
M = 25 Nm
D
ST 2/B
M8x40
D
Fig. 4: Assembling the PE 2 positioning unit
Assembly
D
ST 2/B-100
M8x25
3 842 358 722/2015-05, MIT: PE 2, Bosch Rexroth AG
17/32
E
358 722-03