Maintenance; Product Disposal - TERMA SOA Gebrauchsanweisung

5. Open the valves, fill the radiator with the heating medium from the installation and bleed it.
6. Make sure that the connection between the radiator and the heating element unit is tight.
7. Close one of the valves before using the heating element unit and leave the other one open! (we recommend
that you close the thermostatic valve).
Always make sure that one of the valves is open prior to using the heating element unit!!
8. Connect the heating element unit to the socket / installation. The device is ready for use.
DEVICE DISASSEMBLY
1. In case of a radiator connected to a central heating system, close the valves and remove the
2. Untwist the heating element using a spanner no 22.

MAINTENANCE

1. Disconnect the device from electricity prior to cleaning.
2. Heating element control head should be cleaned with a dry or damp cloth with a very small amount of
detergents, which should never contain any solvents or abrasive agents.

PRODUCT DISPOSAL

This product should not be disposed of as domestic waste but should be brought to the appropriate
collection point for recycling of electric and electronic devices. This information is provided by the
sign on the product, user manual and packaging. Information on the appropriate point for used
devices can be provided by Your local distributor or manufacturer of the product. Thank You for Your
effort towards environment protection.
Downloaded from www.Manualslib.com
heating medium. For electric radiators – take it off the wall and position it in such a way to
unable pouring the heating medium out of the radiator during disconnecting the heating element.
manuals search engine