TERMA SOA Gebrauchsanweisung Seite 15

DUAL FUEL radiator:
1. Radiator connected to the
2. Central heating installation must be fitted with the valves enabling disconnecting the radiator from the rest of the
system.
3. It is recommended to bleed the radiator after every longer interval in use.
4. Heating element must not be installed horizontally or turned downwards.
TOOLS REQUIRED FOR INSTALLATION OF HEATING ELEMENT UNIT
– spanner no 22
INSTALLATION OF THE HEATING ELEMENT UNIT
WARNING! The device must not be connected to electricity during installation. Unplug the device
prior to installation.
1. In case of a radiator connected to the central heating system, close both valves and remove the heating
medium.
2. Insert the heating element (1) into the threaded opening at the bottom end of the collector.
3. Twist the head of the heating element using a spanner no 22.
4. Special gasket (5) assures tightness of connection and allows an additional twist and correct positioning of the
front of the control head.
Downloaded from www.Manualslib.com
central heating system for which heating element unit is installed additionally.
manuals search engine