Product Disposal; Maintenance - TERMA MEG Gebrauchsanweisung

8. Follow the subsequent guidelines when
connecting the electrical installation:
a. Brown wire — live connection to the
circuit (L).
b. Blue wire — connect to neutral (N)
c. Yellow & green wire — earth connec-
tion (PE).
9. Before filling the radiator with heating
medium, ensure that the heating element
is fitted properly and that it is water tight.
10. In central heating installation radiator
must be fitted with the valves enabling
disconnection of the radiator from the
rest of the system.
11. The temperature of the heating agent in
the central heating system must not ex-
ceed 82° C!
12. For detailed installation hints — see the
last pages of this manual.
Notes prior to removal:
1. Before dismantling permanently, discon-
nect the heating element from the mains
and ensure that the radiator is not hot.
2. Be aware. A radiator filled with liquid can
be very heavy. When moving the radia-
tor, ensure that you take the necessary
safety precautions.
12
User manual MEG, DRY, MOA, REG 2, REG 3
3. Before disassembly, close the appropri-
ate valves and drain the radiator com-
pletely to avoid causing any damage.

Product disposal

This product should not be disposed of as
general waste but should be brought to the
appropriate collection point for re- cycling of
electric and electronic devices. This informa-
tion is provided by the sign on the product,
user manual and packaging. Information on
the appropriate point for used devices can be
provided by your local authority, product dis-
tributor or the store from where the product
was purchased. Thank you for your effort to-
wards protecting the environment.

Maintenance

• Before performing maintenance, always
unplug the unit from the mains system.
• Periodically check the fluid level in the
radiator and ensure the heating element
is completely submerged.
• Clean the product with a dry or damp
cloth. If necessary, use a very small
amount of detergent, ensuring that it
contains no solvents or abrasives.