Operating Modes - TR-Electronic EtherCat CEV58 Bedienungsanleitung

6 Operating Modes

Three operating modes are supported by the measuring system:
●
Free Run
●
Sync-Mode
●
Distributed Clocks
In "Free Run" operating mode, the process data are output asynchronously to the
EtherCAT bus cycle time, e.g. in the configuration phase.
In "Sync-Mode" operating mode, the process data are output synchronously to the
EtherCAT bus cycle time.
In "Distributed Clocks" operating mode, the process data are output synchronously to
a self-defined time. The relevant settings are made in the EtherCAT master. By the
measuring system the synchronization signals "SYNC0" and "SYNC1" are supported.
Printed in the Federal Republic of Germany
06/23/2017 TR - ECE - BA - DGB - 0069 - 09
 TR-Electronic GmbH 2008, All Rights Reserved
Page 87 of 116