Operation With A Pabx; Setting The Flash Time; Saving An Access Code (Outside Line Code) - Unify OpenScape S5 Base Bedienungsanleitung

Operation with a PABX

To find out which settings are required for a PABX, please refer to the PABX user guide.
Setting Tone or Pulse dialling mode
¤
Mode

Setting the flash time

¤
. . . possible flash times are listed

Saving an access code (outside line code)

Setting the access code (e.g. "0") for dialling using the fixed line network and using VoIP.
¤
Code
Fixed line
network:
Rule:
Save:
Downloaded from www.Manualslib.com
. . . use to select
OK . . . use to select Tone or Pulse
. . . use to select
. . . use to select
OK . . . then
¤
Access external line with: . . . use
max. 3 digits
¤
For . . . use
Call Lists: The access code will only prefix numbers from a list (list of answered
calls, list of missed calls).
All calls: The access code prefixes all numbers dialled.
Off: The access code is deactivated and does not prefix any telephone
number.
¤
Save
manuals search engine
Settings OK Telephony
Select (
Settings OK Telephony
. . . use to select flash time
Settings OK Telephony
to enter or change access code,
to select when the access code should be dialled
Operation with a PABX
OK Dialling
= selected)
OK Recall OK
Select ( = selected)
OK Access
111