Rejecting/accepting a non-registered Bluetooth device
If a Bluetooth device that is not registered in the list of known devices tries to connect to the
handset, a prompt will appear asking you to enter the PIN of the Bluetooth device (Bonding).
Reject:
Accept:
Changing the Bluetooth name of the handset
The handset is shown by this name on another Bluetooth device.
¤
the device address are shown
Additional functions using the PC interface
QuickSync functions:
•
Sync the handset's directory with Outlook
•
Upload CLIP-pictures (.bmp) from the computer to the handset
•
Upload pictures (.bmp) as screensavers from the computer to the handset
•
Upload sounds (ringtone melodies) from the computer to the handset
•
Update firmware
¤
Connecting the handset to the computer via Bluetooth (
(
p. 80).
Downloaded from
www.Manualslib.com
¤
Briefly press the End call key
¤
. . . use
to enter the PIN of the Bluetooth device to be accepted
. . . Wait for PIN confirmation . . . then
Add the device to the list of known devices:
Use the device temporarily:
long as the device is located within transmission range or until it is switched off
. . . use
to select
The Gigaset QuickSync program has been installed on the computer.
Free to download at
wiki.unify.com/wiki/OpenScape_DECT_Phone_S5
Connect the handset directly to the PC, not via a USB hub.
manuals search engine
Additional functions using the PC interface
.
No . . . the Bluetooth connection can be used, as
Bluetooth
OK
Own Device
Change
. . . use
to change the name
Yes
OK . . . the name and
Save
p. 103) or via a USB data cable
OK
105