Appendix; Questions And Answers - Unify OpenScape S5 Base Bedienungsanleitung

Questions and answers

Questions and answers
The display is blank.
•
The handset is not activated.
•
The battery is empty.
"No Base" flashes on the display.
•
The handset is outside the range of the base station.
station
•
The base is not activated.
•
The base station's range is reduced because Maximum Range is deactivated.
¤
Activate Maximum Range (
base station
"Please register handset" flashes on the display.
•
The handset has not yet been registered or was de-registered due to the registration of an
additional handset (more than 6 DECT registrations).
The handset does not ring.
•
The ringtone is deactivated.
•
The phone does not ring during a specific period or for certain numbers.
¤
Check the time control for external calls (
No ringtone/dial tone from the fixed line network.
•
Incorrect phone cable.
connections are correct when purchasing from a retailer (
Error tone sounds after system PIN prompt.
•
You have entered the wrong system PIN.
if required (
Forgotten system PIN.
¤
Reset the system PIN to 000 (
The other party cannot hear you.
•
The handset is "muted".
Some of the network services do not work as specified.
•
Features are not enabled.
122
Downloaded from www.Manualslib.com
Press and hold
Charge the battery or replace it (
Check the base station power adapter
Activate ringtone (
Please always use the phone cable supplied or ensure that the pin
p. 121)
p. 121)
Activate the microphone again (
Contact the network provider for details.
manuals search engine

Appendix

Move the handset closer to the base
p. 100) or reduce the distance between the handset and
Re-register the handset (
p. 116)
p. 101)
Repeat the process, reset the system PIN to 0000
p. 78)
p. 108)
p. 127).
p. 88)