Operation With A Pabx; Setting The Flash Time; Saving An Access Code (Outside Line Code) - Unify OpenScape DECT Phone S5 Base Bedienungsanleitung

Operation with a PABX

Operation with a PABX
To find out which settings are required for a PABX, please refer to the PABX user guide.
Setting MFV or IWV dialling mode
¤
. . . use
Wahlverfahren

Setting the flash time

¤
. . . use
Zeiten OK . . . possible flash times are listed
Auswahl ( = selected)

Saving an access code (outside line code)

Setting the access code (e.g. "0") for dialling using the fixed line network and using VoIP.
¤
. . . use
Vorwahlziffer
¤
Fixed line Belegen der extern. Leitung mit: . . . use
network: max. 3 digits
¤
Rule:
Anruflisten: The access code will only prefix numbers from a list (list of
answered calls, list of missed calls).
Alle Anrufe: The access code prefixes all numbers dialled.
Aus: The access code is deactivated and does not prefix any telephone
number.
¤
Save: Sichern
110
to select Einstellungen
OK . . . use
to select Einstellungen
to select Einstellungen
OK . . . then
Für . . . use to select when the access code should be dialled
OK Telefonie
to select MFV or IWV
OK Telefonie
. . . use
OK Telefonie
to enter or change access code,
OK
Auswahl ( = selected)
OK
to select flash time
OK
Flash-