Expanding The Functionality Of The Telephone; Multiple Handsets; Registering The Handset - Unify OpenScape S5 Base Bedienungsanleitung

Multiple handsets

Expanding the functionality of the telephone

Multiple handsets
Up to six handsets can be registered to the base station.
Each registered device is assigned an internal number (1 – 6) and an internal name (INT 1 –
INT 6). The number or name assigned can be changed.
If all internal numbers have already been assigned at the base station:
that is no longer needed

Registering the handset

A handset can be registered on up to four base stations.
On the base station
¤
Press and hold the Registration/Paging key on the base station (
On the handset
¤
Handset
registered to four base stations)
system PIN (default setting: 0000)
Once registration is complete, the handset returns to idle status. The internal number of the
handset appears in the display, e.g. INT 1. If not, repeat the procedure.
108
Downloaded from www.Manualslib.com
Registration must be initiated on the base station and on the handset.
Both must be carried out within 60 secs.
. . . use to select
OK . . . use to select the base station (if the handset has already been
Maximum possible number of handsets registered to the base station (all internal
numbers assigned): The handset with the highest internal number is replaced by the
new one. If this is not possible, because a conversation is being held on this handset,
for example, the message No available internal number is given.
handset that is no longer required and repeat the registration procedure
manuals search engine
Settings OK Registration
OK . . . an available base station is sought
OK
de-register a handset
p. 72) (approx. 3 secs).
OK Register
. . . Enter
De-register a