Unify OpenScape S5 Base Bedienungsanleitung Seite 121

¤
OK
new system PIN
Resetting system PIN
Resetting the base station to the original PIN 0000:
¤
Unplug the network cable from the base station
key on the base station
station
PIN is set to 0000
Restoring the phone to default settings
When the settings are reset
•
the date and time are retained,
•
handsets are still registered,
•
the system PIN is retained,
•
Maximum Range is activated and No Radiation is deactivated.
¤
OK
takes around 10 seconds.
Downloaded from www.Manualslib.com
. . . use to select
. . . use to enter the current PIN (if other than 0000)
Save
At the same time reconnect the network cable to the base
Press and hold the key for at least 5 secs . . . the base station is reset and the system
All handsets are de-registered and must be re-registered. All settings are returned to
default settings.
. . . use to select
. . . use to enter system PIN
manuals search engine
Settings OK System
Press and hold the Registration/Paging
Settings OK System
OK Yes . . . the base station is restarted. The restart
System
OK System PIN
OK . . . use to enter
OK Base Reset
121