Target Group; Product Introduction; Product Description; Intended Use - Grundfos AP40-70 Montage- Und Betriebsanleitung

A red or grey circle with a diagonal bar,
possibly with a black graphical symbol,
indicates that an action must not be taken
or must be stopped.
If these instructions are not observed, it
may result in malfunction or damage to the
equipment.
Tips and advice that make the work easier.

1.3 Target group

These installation and operating instructions are
intended for professional installers.

2. Product introduction

2.1 Product description

The AP40-70 pumps are a range of Vortex and
single-channel (1-channel) impeller pumps designed
for transferring sewage, effluents, sludge and surface
water.
Impeller types:
• 1-channel: enclosed single-channel impeller for
liquids containing impurities and sludge with solid
particles or long fibres.
• Vortex impeller: for liquids containing a high level
of impurities or fibrous matter and gas.
6
5
AP70 pump
6
Position
1
2
3
4
5
6

2.1.1 Intended use

These pumps are designed for pumping sewage and
wastewater in a wide range of private and industrial
applications.

2.1.2 Pumped liquids

The pumps must not be used for
pumping combustible, flammable or
corrosive liquids.
The pumps are designed for transferring the following
liquids:
• sewage
• drainage and surface water
• sludge with minimal dry-solids content
• effluent.
1
2
3
4
Description
Lifing bracket
Stator housing
Nameplate
Pump housing
Outlet
Cable plug